Στο νέο online παιχνίδι καζίνο του Nine Casino, εμπνευσμένο από τον κόσμο της κατασκευής στένσιλ, οι παίκτες μπορούν να δημιουργήσουν τα δικά τους μοναδικά μοτίβα για να ξεκλειδώσουν ειδικά επίπεδα παιχνιδιού. Immediate Byte Pro Neoprofit AI

Bird Silhouette Coasters

Everyone has those unwanted water rings on their wood furniture, we’ll help make sure that never happens again with these wooden bird silhouette coasters.

Here’s what you will need:

Most pre-made wooden coasters come with a waterproof finish, so we’ll need to remove that layer by sanding them down.

Grab a stencil and apply painter’s tape to the backside.

Center Stencil1 stencil on coaster.

Using a led pencil, trace the outline of the stencil.

Now fill in the image with your wood burn marker.

Use your heat gun to burn in the image. Repeat these steps for the remaining coasters.

The final step will be applying a waterproof wood finish with a rag. Doing this will not only protect the wood but also showcase the grain and allow the images to pop.

You’re all done, congrats on your brand new Stencil1 coasters!

This How-To was brought to you by ART one (@art_o_n_e)

Please share your version with us @Stencil1

Winter Woodburn Tissue Box

With the weather getting colder and allergy season seeming to hang around, tissue box use is in full effect. With this tutorial, we’ll show you how to blend those cardboard boxes into your seasonal decor.

Here is what you will need:

Begin by removing your Stencil1 stencil from the packaging and applying a piece of painter’s tape to the left and right sides.

Position and attach the stencil and outline the trees and stars.

Once you’ve outlined the entire stencil, remove it from the box.

Attach the fine point bit and then plug in your woodburning tool and set it to the appropriate setting for the wood you are using. Make sure to place the tool on the stand if your kit came with one so you don’t risk it rolling and burning something.

Once the tool is fully heated, begin tracing the pencil marks you laid down. You can also fill in the stars with the fine tip.

When you’re done outlining and the wood has cooled, you can grab your pencil and erase any remaining pencil marks that are visible.

Change over to the leaf-shaped tip. (You might need to turn off the heat and let it cool.) when the new tip is on, you can fill in the trees.

Last you will need to switch over to the flathead tip to fill in any detail that you were unable to with the last tip.

Now you’re all done and can slip your cover over a tissue box, and find a great place for this guy to live during the winter months.

This How-To was brought to you by ART one (@art_o_n_e)

Please share your version with us @Stencil1